宏旭定制 裂缝式排水沟模具 裂缝式水沟模具
The support facility of slit type drainage ditch mold is rib plate. Using it can improve the integrity of the mold products, and the steel bars used should also meet the requirements of metal support. The quality of steel materials should meet the use standards. However, some of the structures have been damaged or the surface is rusty, which can not be used in the production of molds. Slit type drain mould The thickness of steel panel of slit type ditch mould shall not be less than 3mm, and the surface shall be smooth without defects, wrinkles or potholes. During installation, splicing shall be carried out according to the design drawings. The gap shall be tight. The steel panel shall be used after correction. Temporary fixed parts shall be used during assembly to avoid deformation and cut well The steel panel shall be pol大发体育ished and polished in strict accordance with relevant regulations. Slit type drain mould The slit type ditch mold will be cleaned before or after each use, mainly to avoid rust, but also to make it more convenient for workers to remove the mold. This kind of steel formwork should be protected with antirust agent to protect it from rust when it is not in use, so that the size of the mold will not be affected due to rust. If there is oil or dust on it Remove in time.
